Operation and Maintenance :
1. If you need to adjust the machine, please firstly stop the machine before carrying out relevant operations.
2. Chain wheel, bearing and speed reducer of two / three / waves high road way guard rail roll forming machine should be lubricated regularly.
3. The forming roller should be kept clean.
4. With high performance in operation, two / three / waves high road way guard rail roll forming machine generates little noise.
1. Description of c purlin roll forming machine
C purlin roll forming machine is an equipment that produces C shaped steel channels continuously out of galvanized or cold rolled steel strips from feeding, punching for holes, bending and cutting.
The main components of a c sectional channel roll forming machine include a manual decoiler (3TONs capacity), a feeding guide for materials of different sizes, a leveling device, a front hydraulic punching for holes or slots on flanges, roll forming part, a rear hydraulic punching for holes or slots on web, a hydraulic cutting for cut to length, a PLC control cabinet, and and a hydraulic oil pump.
2. Technical Parameters of C purlin roll forming machine
| No. | Item | Description |
| 1 | Raw material width | Below 600mm |
| 2 | Roll forming speed | 15-20m/min |
| 3 | Raw material thickness | 1.0-3.0mm |
| 4 | Type | Galvanized Strip |
| 5 | Main power | 7.5Kw*2 |
| 8 | Pre-Punch | 1 station |
| 9 | Main roller stations | 16 steps |
| 10 | Roller material | Gcr15, quenching and tempering |
| 11 | Main roller material | 45# steel, quenching and tempering, Diameter: 85mm |
| 12 | Length Tolerance | ±1.5mm |
| 13 | Material of cutting | Cr12Mov, quench HRC 58-62℃ |
| 14 | Frequency inverte | Panasonic PLC |
| 15 | Control system | PLC controlling length, encoder is OMRON brand |
| 16 | Transmission typ | 1.5 single row chain drive |
| 17 | Dimension (L*W*H) | 8.5m*1.2m*1.2m |
| 18 | Voltage | 380V,50Hz, 3 phase |
3. Main components of C purlin roll forming machine
| No. | Name | Qty |
| 1 | Decoiler | 1 Set |
| 2 | Guider device | 1 Set |
| 3 | Roll forming unit | 1 Set |
| 4 | Cutting System | 1 Set |
| 5 | Punching device | 1 Set |
| 6 | Output Table | 1 Set |
| 7 | Control System(PLC) | 1 Set |
| 8 | Hydraulic station | 1 Set |
C Purlin Sizes:
| No. | D(mm) | B(mm) | L(mm) | T(mm) | Coil width (mm) |
| 1 | 100 | 50 | 15 | 1-3 | 210 |
| 2 | 120 | 50 | 20 | 1-3 | 240 |
| 3 | 140 | 50 | 20 | 1-3 | 260 |
| 4 | 140 | 60 | 20 | 1-3 | 280 |
| 5 | 150 | 50 | 20 | 1-3 | 270 |
| 6 | 160 | 60 | 20 | 1-3 | 300 |
| 7 | 180 | 60 | 20 | 1-3 | 320 |
| 8 | 180 | 70 | 20 | 1-3 | 340 |
| 9 | 200 | 65 | 20 | 1-3 | 350 |
| 10 | 200 | 70 | 20 | 1-3 | 360 |
| 11 | 220 | 70 | 20 | 1-3 | 380 |
| 12 | 220 | 80 | 20 | 1-3 | 400 |
| 13 | 240 | 70 | 20 | 1-3 | 400 |
| 14 | 240 | 80 | 20 | 1-3 | 420 |
| 15 | 250 | 80 | 20 | 1-3 | 430 |
| 16 | 300 | 70 | 20 | 1-3 | 460 |
| 17 | 300 | 80 | 20 | 1-3 | 480 |
4. Application:
The c purlin which was produced by C purlin roll forming machine can be used for the major stress structure of the large and middle sized industrial constructions and civilian constructions. The roof load bearing and wall panel supporting of the plants, warehouses, engine houses, hangars, exhibition halls, cinemas, gymnasiums, fair flower stands, etc.
Product Tags:
|
|
1250mm OD 3.2mm C Z Purlin Roll Forming Machine 20m/Min Output Images
|
